Philips LC4.5E Service Manual page 9

4.3.7 Power Supply Panel
X530
1
1
X520
Figure 4-10 Power supply panel
1. Disconnect all cables (1) from the panel. Notice that the
two connectors for X520 and X530 on this panel are
similar, and should not be mixed up later when they are
reconnected (X520 is connected via its flatcable to
connector 66B on the LCD panel, near the R-speaker;
X530 is connected via its flatcable to connector 67B on the
LCD panel, near the L-speaker).
2. Remove the three fixation screws (2) from the panel.
3. Take the panel out of its brackets.
4.3.8 Audio Panel
1
2
Figure 4-11 Audio panel
1. Disconnect all cables (1) from the panel.
2. Remove the fixation screws (2) from the panel.
3. Remove the panel.
Mechanical Instructions
2
1
2
1
2
F_15390_045.eps
280205
2
F_15390_044.eps
280205
LC4.5E AA
4.3.9 LCD Panel
Figure 4-12 Anti-static copper foil - Photo A
Figure 4-13 LVDS connector - Photo B
4
Figure 4-14 Connectors for side I/O panel, keyboard control panel,
and LED panel on TV & scaler board - Photo C
4. EN 9
2
1
F_15390_047.eps
280205
3
F_15390_048.eps
280205
F_15390_053.eps
280205