To Turn Off Cell Cdma Transmitter - Nokia RH-17 Series Troubleshooting - Rf

CCS Technical Documentation
Vibra Test: Set Local Mode First, Testing/Troubleshooting - Baseband Testing - Vibra Test,
Vibra State to Enable, Vibra Intensity to ?.
Phone Information: CDMA - Phone Information.
Phone Settings: CDMA - Phone Settings.
EM Calibration: Set Local Mode First, Testing/Troubleshooting - Baseband Testing - EM
Calibration.

To turn off Cell CDMA Transmitter

Under the RF menu, choose Main Mode, which opens the dialog box shown below.
To turn on the transmitter, first turn on the carrier by highlighting "RX/TX" in the sub-
window at the top (which also turns on the receiver), typing the channel in the Channel
field, then clicking the Set button in the upper right-hand corner.
Next, turn on the modulation by opening the CDMA Control dialog box under the DSP
menu. This dialog box is shown next.
Issue 1 04/2003
Nokia Corporation
Troubleshooting — RF
Confidential
RH-17
Page 53