Advertisement
RH-23
Disassembly and Assembly Instructions
The Keymat can now be removed.
Open the Coax Connector by using tweezers as shown in
the picture.
Take the Engine Module away.
Page 8
Company confidential
Note that UI-PWB is glued to the Engine Module with a
UI-Adhesive. Do not bend the UI-PWB when detaching it
from Engine Module.
Open the connector carefully before separating the
Upper Block
To avoid damage to the B-Cover Lower see also video
clip on Care Point. Remove the Vibra Retainer by using a
slotted screwdriver as a lever.
Nokia Corporation.
CCS Technical Documentation
Issue 1 02/2004
Advertisement
