Advertisement
RH-23
Disassembly and Assembly Instructions
Dome Sheet Assembly
Protect the UI Adhesive.
Take care about LEDs on the UI PWB Module during
removal of the Domesheet.
Put the new Domesheet onto the Domesheet Assembly
Jig. Mind the guiding pins.
Page 10
Company confidential
Remove the faulty Domesheet by lifting it up carefully
from UI PWB Module.
Clean the pads on the PWB Module with a clean cloth if
necessary. Be carefully not damage the components on
the PWB.
Remove the protection film. Tweezers can be used for
retaining the Domesheet.
Nokia Corporation.
CCS Technical Documentation
Issue 1 02/2004
Advertisement
