Kodak 6900 User Manual page 46

Operating the Printer
Display - Level 1
STATUS PRINT
Clear Slitter
Combo Wait Set
4-4
Display - Level 2
----
----
Wait Combo
Do not use the Software Operator Control Panel (SOCP) when
printing with the driver. Close the SOCP before you print. If the
SOCP is left open when printing, the SOCP will close and the
printer may reboot. If there are jobs in the print queue, printing
will resume after the reboot.
Description
Prints a sheet with the printer serial number, counts,
errors, and firmware information.
This feature turns on the slitter drive mechanism for
a few seconds. Use this if there is a jam in the slitter.
The amount of time the Printer waits for the next
print.
October 2020