Wells H-336 Specifications page 2

W M
E L L S A N U F A C T U R I N G
R
R
STD.4
D I M E N S I O N S :
10
(254)
5 7/8
(149)
H - 3 3 6 E L E C T R I C A L S P E C I F I C AT I O N S :
MODELS VOLTS
H-336 208
H-336 240
NOTE: Specifications are subject to change without notice. See installation instructions prior to installing
unit. This document is not for installation purposes. The installation of recognized component units requires
additional evaluations to Underwriters Laboratories Inc. standards.
THIS UNIT IS DESIGNED TO BE INSTALLED IN METAL COUNTERS ONLY.
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. • USA PHONE: (775) 689-5700 • FAX: (775) 689-5972
FOR ORDERS ONLY: (888) 356-5362 • FAX: (800) 356-5142 • www.wellsbloomfield.com
© 2001 WELLS MANUFACTURING • PRINTED IN THE U.S.A. • 2/01 • REV(F) • PART NO. 37117
INCH
(MM)
6 1/4
(159)
WATTS AMPS
2000 9.4
2600 10.8
B U I LT- I N H O T P L AT E
SUGGESTED CLEARANCE
UNIT TO THE NEAREST SURFACE
BACK SIDE BOTTOM
1 2
(25) (51) (203)
NOTE: Depending on the installation,
clearances can be reduced upon further
evaluations to UL standards.
3/4
(19)
1 11/16
(43)
3 5/16
(84)
PHASE POWER SUPPLY CORD
SINGLE NONE
SINGLE NONE
M O D E L
H - 3 3 6
FRONT
8 4 1/8
(105)
4 13/16
(122)
WELLS