Paper Trays 3, 4
1.
Pull out the Paper Tray where the paper jam occurred until it
stops.
2.
Remove the jammed paper.
3.
Pull out the Tray 3 and Tray 4.
4.
Pull out the unit [C], then open the handle and remove the
jammed paper.
5.
Close the handle and push in the Paper Tray.
Bypass Tray
1.
Remove the jammed paper.
When a message appears on the control panel to cut the
paper, cut the base of paper without pulling the paper out,
and then tap [Confirm].
2.
Remove all the paper from the bypass tray, and then load the
paper again.
Note
If the paper is not visible, open the Paper Tray 5 (Bypass) Top
Cover, and then remove the jammed paper.
Duplex Automatic Document Feeder
1.
Remove all documents from the Document Tray.
28
Reference Guide Main Unit