Preparing The Intelligent Pantilter; Mounting The Base - Sony Party-shot IPT-DS1 Operating Instructions Manual

Preparing the intelligent pantilter

Mounting the base

The base A is pre-mounted in the tilt arm of this unit. Make sure it is mounted
properly.
If the base is loose:
Mount the base in the right direction, as described below.
Multi connector
¦
Notes
Hold the base so that the base name reads in the same direction as the Sony logo on
ˎ
the main unit, and mount it straight down onto the main unit.
Make sure that it is securely fitted all the way down.
ˎ
Do not touch the multi connector.
ˎ
Base name
11-GB