Installation - Saniflow M02A-UL Installation And Operating Manual

INSTALLATION

Dismantling for installation
• The hand dryer is supplied with the metallic cover coupled to the base in a
unscrewed stated.
• The cover should be extracted taking into account its upper rib placed in its
fitting on the base.
• The cover must be removed obliquely until the upper rib has been extracted.
Take care to avoid:
- Damaging the internal parts (mainly electronic components)
- Damaging the cover. It is recommended placing it on a flat
surface facing upwards and on a cloth.
Mounting
The assembly should be preferably
prepared for rear ducting.
• Drill holes of 5/16" (8 mm) in the
wall, using the template supplied.
Clean the holes of the resulting dust
and insert the plugs.
• Pass the power cables from the wall
through the 7/8" (22 mm) hole
situated beneath the connection
board of the appliance.
• Screw the base of the appliance
tightly to the wall ensuring the 4
silent-blocks are correctly positioned.
• Enter the power cables and earth
wire into the inside space containing
the terminal strip, passing them
through the entry hole.
- 2 -
ENGLISH