On/Standby Button - TechniSat TECHNISTAR K4 ISIO Brief Instructions

7.1 Switching the device on/o
> W hen the device is on standby, you can switch it on by pressing the
the remote control/device.
> W hen operating normally you can switch the device to standby mode by pressing the

On/Standby button.

W hen switching the device on and o , note Section 7.1 of the operating manual as well.
7.2 Calling up the main menu and navigating through the menus /functions
The following example shows how to reach the main menu and call up a submenu. The objective of the
example is to call up the
> Pr ess the Menu button. The main menu appears on the screen.
> Sele ct the Settings menu item by moving the highlight over this item using the
> Pr ess the OK button to open the
Picture Settings menu.
Settings menu.
On/Standby button on
arrow keys .
19