Advertisement
Figure 21
Fold and
Extend hoses
Disconnect
wiring
Installing on Tractor –
-
All bushings and pins are provided for Category I and II three-point hitches.
Connect lower links – make sure you include the stabilizer link bushings(Figure
-
24)
-
Connect top link
-
Raise three point to desired height and level with top link
Install lower stabilizer mount on drawbar and tighten 5/8" bolts
-
-
Connect LH and RH stabilizer to upper and lower points, adjust, and lock with
jam nut.
-
Connect hydraulic hoses noting P and T
-
Retract stabilizer stands and engage hydraulics -- locking valve into detent with
tarp strap or other device. Make sure that flow is correct or controls will be
backward.
5-12
Advertisement
