Supermicro A+ User Manual page 32

A+ Server AS -4124GO-NART/AS -4124GO-NART+ User's Manual
Installing the Processor and Heatsink
1. Unscrew the screws holding down Force Frame in the sequence of 3-2-1. The screws
are numbered on the Force Frame next to each screw hole.
Screw #3
Screw #2
Force Frame
1. Lift the Rail Frame up by gripping the lift tabs near the front end of the rail frame. While
keeping a secure grip of the Rail Frame, lift it to a position so you can do the next step
of removing the External Cap.
2. Note: The Rail Frame is spring loaded, so keep a secure grip on it as you lift it so it
does not snap up.
Rail Frame
32
Screw #1
PnP Cover Cap