Brother DCP-117C Quick Setup Manual page 10

Step 2
For Windows
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 2 - 6.
1
Disconnect the machine from the power
socket and from your computer, if you have
already connected an interface cable.
2
Turn on your computer.
(For Windows
must be logged on as the administrator.)
3
Insert the supplied CD-ROM into your
CD-ROM drive. If the model name screen
appears, select your machine. If the
language screen appears, select your
language.
4
The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.
If this window does not appear, use
Windows
program from the root directory of the
Brother CD-ROM.
5
After reading and accepting the ScanSoft
PaperPort
Yes.
6
The installation of PaperPort
automatically start and is followed by the
installation of MFL-Pro Suite.
7
When the Brother MFL-Pro Suite Software
License Agreement window appears, click
Yes, if you agree to the Software Licence
Agreement.
8
Installing the Driver & Software
®
98/98SE/Me/2000 Professional/XP
®
2000 Professional/XP, you
®
Explorer to run the setup.exe
®
9.0SE License Agreement, click
®
9.0SE will
8
Select Standard, and then click Next.
The installation will continue.
9
When the screen appears, connect the USB
interface cable to your PC, and then
connect it to the machine.
To connect the USB cable to the machine:
1. Open the scanner cover to its open
position.
2. Connect the USB cable into the USB
socket, marked with a
will find the USB socket above and to the
left of the ink cartridge slots, as shown
below.
®
3. Carefully guide the USB cable into the
trench as shown below, following the
trench round and toward the back of the
machine.
Warning
Ensure that the cable does not restrict the cover from
closing, or an error may occur.
symbol. You