Cleaning And Maintenance - Beem Comfort Clean V2 Instruction Manual

Shoe polishing machine

Hide thumbs

Table Of Contents

Table of Contents

Available languages

•

Exert as little pressure as possible on the hard cleaning brush with the shoes. Too

much pressure may damage the shoes.

•

If a non-colourless shoe wax is used, the brushes and the shoes which are

subsequently polished may be discoloured.

We recommend the use of colourless shoe wax so that shoes of any colour can

be polished with the shoe wax. Otherwise always make sure you insert the correct

shoe wax container into the device before the shoes are cleaned (see the "Cleaning

and Maintenance" chapter | "Inserting / Removing the Shoe Wax Container")!

1. Dust off coarse dirt from the shoes which are to be cleaned beforehand.

2. Switch on the device by pressing the On / Off switch (9) on the top of the device.

3. Use the hard cleaning brush (7) to remove dirt and dust from the surface of the shoes.

4. To apply shoe wax from the shoe wax container, press the shoe gently against the

sphere on the shoe wax dispenser (4) and move it gently back and forth (Picture B).

5. Polish the shoe with the appropriate cotton brush. Use the left cotton brush (8) for light

shoes and the right cotton brush (3) for dark shoes.

6. Repeat steps 3 – 5 for the second shoe.

7. Switch off the device by pressing the On / Off switch.

8. If the device is not going to be used for a prolonged period, pull the mains plug out of

the plug socket and clean the device (see the "Cleaning and Maintenance" chapter).