Before Initial Use; Operation - Beem Comfort Clean V2 Instruction Manual

Shoe polishing machine
Table of Contents

Advertisement

Available languages

Available languages

EN
3 Cotton brush, light
4 Shoe wax dispenser
5 Dirt trap mat
6 Drive
7 Hard cleaning brush
8 Cotton brush, dark
9 On / Off switch
Not shown:
Operating instructions
Shoe wax container comprising approx. 150 ml of shoe wax (colourless)

Before Initial Use

NOTES
Always set up the device with a clear space at the sides (at least 20 cm) and clear
space above it (at least 30 cm) on a fl at, solid, dry and non-sensitive surface.
The surfaces of fl oors may possibly contain elements which can attack and
soften the adjustable feet of the device. If necessary, place a suitable pad
below the adjustable feet.
1. Set up the device in a suitable location, following the safety instructions and the notes
provided at the beginning of this chapter.
2. Insert the shoe wax container (see the "Cleaning and Maintenance" chapter | "Inserting
/ Removing the Shoe Wax Container").
Do not throw away the empty shoe wax container located in the holder for the shoe
wax container (2)! This can also be fi lled.
3. Fully unwind the mains cable.
4. Insert the mains plug into a properly installed socket that is easily accessible.

Operation

NOTES
Do not hold the shoes against the device with your hands, but rather wear the
shoes on your feet.
Shoe laces must be tied up because otherwise they may become caught up in the
brushes.
02116_DE-EN-FR-NL_A5_V1.indb 20
02116_DE-EN-FR-NL_A5_V1.indb 20
20
01.12.2017 09:55:42
01.12.2017 09:55:42

Advertisement

Table of Contents
loading

Table of Contents