Cleaning The Laser Scanner Window - Brother DCP DCP-7030 User Manual

d
Plug the machine's power cord back into
the AC power outlet first, and then
reconnect all cables. Turn on the
machine's power switch.
Note
In addition to cleaning the scanner glass
and glass strip with a soft lint-free cloth
moistened with water, run your finger tip
over the glass to see if you can feel
anything on it. If you feel dirt or debris,
clean the glass again concentrating on
that area. You may need to repeat the
cleaning process three or four times. To
test, make a copy after each cleaning.
64
Cleaning the laser scanner
window
WARNING
DO NOT use isopropyl alcohol to clean the
laser scanner window.
CAUTION
DO NOT touch the laser scanner window
with your fingers.
a
Before you clean the inside of the
machine, turn off the machine's power
switch.
Unplug the power cord from the AC
power outlet.
b
Open the front cover and slowly take out
the drum unit and toner cartridge
assembly.
B