Release The Scanner Lock; Connect The Power Cord - Brother DCP 8060 Quick Setup Manual

Step 1
Release the Scanner
3
Lock
1
Push the lever (1) in the direction shown to
unlock the scanner.
(The gray scanner lock lever is located at
the back left side, under the document
cover (2).)
(1)
6
Setting Up the machine
4

Connect the Power Cord

1
Make sure that the power switch is off.
Connect the AC power cord to the machine.
(2)
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
If
immediately release the scanner lock and
press Stop/Exit. (See "Release the Scanner
Lock" on page 6.)
Do not connect the Parallel or USB
cable yet.
appears on the LCD,
Scanner Locked