For Mac Os ® 9.1 To 9.2; 10.2.4 Or Greater - Brother DCP 8060 Quick Setup Manual

Step 2
For USB Interface Cable Users
For Mac OS
Make sure that you have finished the instructions from Step 1 "Setting Up
the machine" on pages 4 - 7.
For Mac OS
upgrade to Mac OS
(For the latest information for Mac OS
visit http://solutions.brother.com)
1
Switch off the machine and disconnect the
machine from the power socket (and from
the Macintosh
connected an interface cable).
2
Turn on your Macintosh
3
Insert the supplied CD-ROM for Macintosh
into your CD-ROM drive.
4
Double-click the Start Here OSX icon to
install the drivers and MFL-Pro Suite. If the
language screen appears, choose your
language.
22
Installing the Drivers & Software
®
X 10.2.4 or greater
®
X 10.2.0 to 10.2.3 users,
®
X 10.2.4 or greater.
®
, if you have already
®
.
5
Click MFL-Pro Suite to install.
®
X,
6
Follow the on-screen instructions, and
restart your Macintosh
7
After the DeviceSelector window appears,
connect the USB interface cable to your
Macintosh
®
The DeviceSelector window will not appear if
you have also connected a USB interface
cable to the machine before restarting your
Macintosh
previously installed version of the Brother
software. If you encounter this problem
continue with the installation but skip step 9.
You should choose your Brother machine
from the Model pull-down list in the main
screen of ControlCenter2. (For details, see the
Software User's Guide on the CD-ROM).
®
.
®
and then to the machine.
®
or if you are overwriting a