Bosch MKK-040 Instructions Manual page 5

R320103169/2020-08 | Linear modules MKK/MKR-xxx-NN-3
Safety instructions are structured as follows:
SIGNAL WORD
Type of hazard!
Consequences if ignored.
Hazard prevention measure.
f
• Warning sign: draws attention to the hazard
• Signal word: indicates the severity of the hazard
• Type of hazard: indicates the type or source of hazard
• Consequences: describes the consequences that may occur if precautions to avoid the hazard are not taken
• Hazard prevention measure: indicates how to avoid the hazard
The safety instructions cover the following hazard classes. The hazard class describes the risks involved if the
safety instruction is not complied with.
Table 2: Hazard classes as per ANSI Z535
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTE
1.3.2 Symbols
The following symbols indicate notes which are not related to safety but make the documentation easier to
understand.
Table 3: Meaning of the symbols
Symbol Meaning
If this information is not observed, the product will not be optimally used / operated.
Single, independent work step
X
1.
Numbered work steps
2.
The numbers indicate the sequence of the work steps.
3.
! 7 See section 7
!  Fig. 7.1 See figure 7.1
Screw with strength class...
Tightening torque
u
m Friction factor for screws
Meaning
Indicates a hazardous situation which will result in death or serious injury if not avoided.
Indicates a hazardous situation which may result in death or serious injury if not avoided.
Indicates a hazardous situation which may result in minor or moderate injury if not avoided.
Property damage: The product or surroundings may be damaged
Bosch Rexroth AG 5/62