Advertisement
Available languages
Available languages
Thank you for purchasing this Hampton Bay interior portable luminaire. This
product has been manufactured to the highest standards of safety and quality.
The durable finish and hard back shade design provide for care-free
maintenance. Simply wipe with a clean towel to keep looking showroom new.
FEATURES:
1. Durable easy to maintain finish; simply wipe with a clean soft cloth to
keep looking new. This table lamp is part of the matching Towne Heights
collection available at The Home Depot.
2. On/off switch provides just the right amount of light where it is needed.
3. Popular E27 lamp holder may be fitted with a CFL equivalent energy-
saving bulb.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service
Team at 1-877-527-0313 or visit www.homedepot.com. Please reference your
SKU 338-000 Brushed Steel & Acrylic Table Lamp with CFL Bulb when
speaking to a Customer Service agent.
CAUTION:
1. Before starting to assemble your portable luminaire, spread all parts out on
a clean flat surface. Inspect each part for defects that may have occurred
during shipping.
Important: Inspect the wire insulation for any cuts, abrasions or exposed
copper that may have resulted during shipping. If there is a defect in the
wire, DO NOT continue the assembly operation. Please call our Customer
Service Team at 1-877-527-0313.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS.
3. Keep your receipt and these Instructions for Proof of Purchase.
Page 2
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 ea – Socket
1 ea - Base (C)
Assembly (A)
1 ea - Finial (F)
1 ea—Harp (D)
ASSEMBLY INSTRUCTIONS:
1. Screw Socket Assembly (A) clockwise into
Tube (B) until secure; pull any excess cord
through Tube (B).
2. Screw Tube (B) clockwise into the Base (C)
until secure; pull any excess cord through
Base (C).
3. Install Harp (D) to the Under Harp of Socket
Assembly (A).
4. Install a 100-watt maximum Type A (or CFL
equivalent) bulb (G) into Socket Assembly
(A).
5. Place Shade (E) over Harp (D); secure by
screwing Finial (F) clockwise to Harp (D).
Page 3
1 ea – Shade (E)
1 ea - Tube (B)
1 ea - Bulb - 23W (G)
Advertisement
