Advertisement
Table of Contents
HEPA Air Cleaners
Installation Manual
Please Read And Save These Instructions
GENERALAIRE
HEPA AIR CLEANERS
®
Model
GFI #
Weight (Pounds)
Dimensions (Inches)
Rated Air Flow (CFM)
Min. Ave. % Eff. 1.0-3.0 Microns
Operation
Replacement Filters
Power Consumption (Watts)
Amperage
Certification
Collar / Intake / Exhaust
Openings (Inches)
Pallet Quantity
Mounting
Warranty (Years)
In the Box
24" H
400D (Duct Mount)
4640
Air Flow From Furnace Through Air Cleaner/Fan Coil
1. HEPA (GFI #4645) - Replace Every 2 Years / 2. Pre-Filter (GFI #4646) With Carbon - Replace Every Year
Return Air Duct Mount / Collar
HEPA Air Cleaner, 9' Power Cord, Installation Manual,
Duct Collars, Pre-Filter, HEPA Filter, 3 Mounting
Brackets, Screws, Mounting Template
General Filters, Inc.
43800 Grand River Avenue
Novi, Michigan 48375
Toll Free: (866) 476-5101
www.generalaire.com
70081850
35
24 H x 12.75 D x 17 W
400
HEPA 99.97%
300
115V / 1 / 60Hz; 2.75 Amp
CSA
C
US
Collar: 8 (203mm)
Intake: 3.75 (95mm) x 14.375 (365mm)
Exhaust: 3.75 (95mm) x 14.375 (365mm)
18
5
HEPA Air Cleaner, 9' Power Cord, Installation Manual,
Pre-Filter, HEPA Filter, Screws, Caster Wheels
400 Series HEPA Air Cleaners
400D (GFI #4640)
& 40OR (GFI #4641)
400R (Room/Portable)
4641
Room / Portable
Room / Portable
24" H
®
Advertisement
Table of Contents
Related Manuals for GeneralAire 400 Series
Summary of Contents for GeneralAire 400 Series
- Page 1 HEPA Air Cleaners 400 Series HEPA Air Cleaners 400D (GFI #4640) Installation Manual & 40OR (GFI #4641) Please Read And Save These Instructions 24” H 24” H 70081850 GENERALAIRE HEPA AIR CLEANERS ® 400D (Duct Mount) 400R (Room/Portable) Model GFI #...
- Page 2 ® INSTALLATION • WARNING: Disconnect electrical power before beginning installation. 1. Before Installing Your New Surface or Duct Mount HEPA Air Cleaner, Determine: • Location on the return side of the duct for installation of your HEPA 200D or 400D. • Determine if you will be installing via surface mount or duct mount.
- Page 3 ® INSTALLATION CONT. Duct Mount HEPA (Model 400D) 1. Install mounting support bracket on return air duct for bottom support using the provided #8 x 1/2” screws. 2. Install the side mounting brackets on both sides of the unit by removing and remounting the screws located on the unit.* 3.
- Page 4 6. Door Latch 7. Casters (R Model Only) WARRANTY Your new HEPA Air Cleaner carries a 5-year limited warranty. For our complete warranty policy visit www.generalfilters.com. 43800 Grand River Avenue Novi, Michigan 48375 Toll Free: (866) 476-5101 www.generalaire.com Last Updated: 12-2020...
Need help?
Do you have a question about the 400 Series and is the answer not in the manual?
Questions and answers