Blodgett KLS-100G Installation Operation & Maintenance page 28

4. FIRST AID
EYES:
SKIN:
INGESTION:
INHALATION:
NOTE TO PHYSICIAN:
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
FLASH POINT:
METHOD USED:
AUTOIGNITION TEMPERATURE: NOT DETERMINED
FLAMMABILITY LIMITS
LFL: Not determined
UFL: Not determined
HAZARDOUS COMBUSTION PRODUCTS: During a fire, smoke may contain the original
material in addition to unidentified toxic and/or irritating compounds. Hazardous combustion
products may include and are not limited to carbon monoxide and carbon dioxide.
OTHER FLAMMABILITY INFORMATION: Violent steam generation or eruption may occur
upon application of direct water stream to hot liquids. Flammable concentrations of vapour can
accumulate at temperatures above 214EF. Liquid mist of this product can burn. Spills of these
organic liquids on hot fibrous insulations may lead to lowering of the autoignition temperatures
possibly resulting in spontaneous combustion. Container may rupture from gas generation in a
fire situation.
EXTINGUISHING MEDIA: Water fog or fine spray, carbon dioxide, dry chemical, foam. Alcohol
resistant foams (ATC type) are preferred if available. General purpose synthetic foams
(including AFFF) or protein foams may function, but much less effectively. Do not use direct
water stream. May spread fire.
Flush eyes with plenty of water.
Wash off in flowing water or shower.
No adverse effects anticipated by this route of exposure incidental
to proper industrial handling.
Remove to fresh air if effects occur. Consult a physician.
No specific antidote. Supportive care. Treatment based on
judgment of the physician in response to reactions of the patient.
214EF, 107EC (based on a similar material)
PMCC
28