Mitsubishi Electric SLZ-KF09 Operation Manual page 11

Service menu
Test run
Input maintenance info.
Function setting
Check
Self check
Main menu:
Cursor
F1 F2 F3 F4
Function setting
Ref. address Grp.
Mode 1
Mode 2
Mode 3
Mode 4
Request:
Cursor Cursor
F1 F2 F3 F4
Function setting
Ref. address
Sending data
F1 F2 F3 F4
B
Function setting
Ref. address
Unit No.
Grp./1/2/3/4/All
Monitor:
Cursor Address
F1 F2 F3 F4
Function setting
Unit # 1
Ref. address
Mode 7
Mode 8
Mode 9
Mode 10
Request:
Cursor Cursor
F1 F2 F3 F4
A
C
1
button.
2
through [F4
rent setting.
[SELECT
lected refrigerant address will start fan operation.
3
4
[F1 or [F2
change the setting number with the [F3 or [F4 button.
5
ting data from the remote controller to the indoor units.
Function setting screen.
1 Going to the function select mode
button between of 5 seconds.
press the button.
2 Setting the unit number
button to set unit number A
press the button.
3 Select a mode
press the button.
4 Selecting the setting number
button to change the Setting number C
press the button.
5 To select multiple functions continuously
Repeat select 3 and 4 to change multiple function settings continuously.
6 Complete function selection
Direct the wireless remote controller toward the sensor of the indoor unit and press
the button.
[SELECT
[SELECT
B
11