Dicota Vent User Manual page 3

Safety notice:
1. This product complies with IEC 60825-1, class 1 laser product.
2. This product complies with FCC and CE rules.
3. This product has no serviceable parts. Use of controls or adjustments
of procedures other than the user guide mentiones may result in mal-
function or dangerous.
SETUP the Mouse
The mouse is connected to your computer via the USB cable. It needs to
be plugged in to your Notebook or PC by a USB port or a mouse port.
For USB port installation
Windows 98 (or higher) is required for USB port
installation. Connect the receiver cable to the USB
port on the computer. For Windows, you may be
prompted to insert the Windows software CD.
Insert the Windows driver CD into the computer's CD-ROM drive when
asked to do so. Follow the instructions steps.
Using the ventilator
To use the ventilator please use the ON/OFF button at the bottom side of
the mouse. Notice: the mouse can be used without the ventilator as well.
CAUTION:
Change or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate
the equipment.
3
USB Port