DeVilbiss SB-E2-2-252 Operation Manual page 3

SAFETY WARNINGS
Fire and explosion
Solvents and coating materials
can be highly flammable or
combustible when sprayed. ALWAYS
refer to the coating material suppliers
instructions and
before using this equipment
Users must comply with all local
and national codes of practice
a n d i n s u r a n c e
r e q u i r e m e n t s
ventilation, fire precautions, operation
and house-keeping of working areas
This equipment, as supplied,
is NOT suitable for use with
Halogenated Hydrocarbons.
Static
generated by fluid and/or air
passing through hoses, by the
spraying process and by cleaning non-
conductive parts with cloths. To prevent
ignition sources from static discharges,
earth continuity must be maintained to
the spraygun
equipment used. It is essential to use
conductive air and/or fluid hoses.
Personal Protective
Equipment
Toxic vapours – When sprayed,
certai n
poisonous, create irritation or be
otherwise harmful to health.
Always read all labels and safety data
sheets for the material before spraying
and follow any recommendations. If In
Doubt, Contact Your Material
Supplier
The use of respiratory protective
equipment is recommended at all
times. The type of equipment must be
compatible with
sprayed.
COSHH sheets
c o mp a n y
g o v e r n i n g
Electricity can
and other metallic
materials may
the material
Always wear eye protection when
spraying or cleaning the spraygun
Gloves
s p r a y in g
equipment
Training – Personnel should be
given adequate training in the safe use
of spraying equipment.
Never aim a spraygun at any part of the
body
Never exceed the max. recommended
safe working pressure for the equipment
The fitting of non-recommended or non-
original spares may create hazards
Before cleaning or maintenance, all
be
pressure must be isolated and relieved
from the equipment
The product should be cleaned using a
gun washing machine. However, this
equipment should not be left inside gun
washing machines for prolonged periods
of time.
The A-weighted sound level of
sprayguns may exceed 85 dB
(A) depending on the set-up
being used. Details of actual
noise levels are available on request. It
be
is recommended that ear protection is
worn at all times when spraying.
Spray Equipment using high pressures
may be subject to recoil forces. Under
certain circumstances, such forces could
result in repetitive strain injury to the
operator.
being
3
must be worn
o r c l e an i n g
Misuse
Noise Levels
Operating
© 2003 ITW Finishing Systems and Products
E
E
when
t h e