Functional Description - Makita BUX360 Instruction Manual

Parts description
5
9
1 Battery cartridge
2 Indicator lamp
3 Switch trigger
4 Hanger (suspension point)
* In some countries, the barrier is not provided with the tool.
FUNCTIONAL
DESCRIPTION
WARNING:
• Always be sure that the tool is switched off
and the battery cartridge is removed before
adjusting or checking functions on the tool.
Failure to switch off and remove the battery
cartridge may result in serious personal injury
from accidental start-up.
1
2
4
6
5 Grip
6 Barrier *
7 Shoulder harness
8 Buckle
3
9
Installing or removing battery
cartridge
CAUTION:
• Hold the tool and the battery cartridge firmly when
installing or removing battery cartridge. Failure to
hold the tool and the battery cartridge firmly may cause
them to slip off your hands and result in damage to the
tool and battery cartridge and a personal injury.
• Always switch off the tool before installing or
removing of the battery cartridge.
► Fig.1: 1. Red indicator 2. Button 3. Battery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the battery
cartridge with the groove in the housing and slip it into place.
Always insert it all the way until it locks in place with a little
click. If you can see the red indicator on the upper side of the
button, it is not locked completely. Install it fully until the red
indicator cannot be seen. If not, it may accidentally fall out of
the tool, causing injury to you or someone around you.
7 ENGLISH
7
8
Joint