Yamaha XVS1100 2001 Supplementary Service Manual page 21

A Clamp the throttle cables with
the holder. Position the end of
clip downword.
B Route the rear brake switch lead
under the master cylinder reser-
vor hose.
C Position the band end of right
side bracket.
D Position the steel band end to
forward.
CABLE ROUTING
E Position the steel band end to
right side.
F Route the battery positive (+)
lead through the slit of the bat-
tery box.
G Clamp the igniter unit lead to the
frame with a holder.
H To the rear fender.
–13–
SPEC
I Connect the wireharness to the
ignitar unit through the hole of
LID. 2.
J Route the fuel tank breather
hose under the fuel filter and
connect it (fuel tank sideroll over
valve side) with a joint. Position
the end of clip outside.