Yamaha XVS1100 2001 Supplementary Service Manual page 14

27 A Fasten the handlebar switch
lead (left and rihgt) to the hand-
lebar with plastic locking tie and
cut the end of tie.
B Fasten the mainharness with a
plastic clamp at the back of the
cable guide.
C Clamp the wireharness with the
hook of frame side.
CABLE ROUTING
D When installing the pipe of
throttle cable press it inside.
E Clamp the fuel hoses to the
frame with the clamp.
F Change the fuel hose (fuel cock
side) and fuel hose (carburetor
side) between guide of frame
and clamp. (carburetor side is
upper)
–6–
SPEC
G When connecting the sensing
hose (carburetor joint-AIS) with
a nozzle.
H Push the sensing hose inside of
the LID and not bend the sensing
hose.
I Push the wireharness inside of
the side cover.