Time-Of-Day Clock, Minutes - Whirlpool CHW9150 Manual

FOR SERVICE TECHNICIAN ONLY - DO NOT REMOVE OR DESTROY
CODE
OPTIONS TO USE IF SPECIAL PRICING IS SELECTED (cont.):
5.0 0

TIME-OF-DAY CLOCK, MINUTES

5.00 This is the TIME-OF-DAY CLOCK, minute setting; select 0-59
minutes by pressing the HOT button.
g
Press the WARM button once to advance to next code.
6.0 0 TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time or 24 hr. clock.
6.00 This is the TIME-OF-DAY CLOCK, hour setting; select 0-23 hours
by pressing the HOT button.
g
Press the WARM button once to advance to next code.
7.0 0 SPECIAL PRICE START HOUR
NOTE: Uses military time or 24 hr. clock.
7.00
This is the start hour; 0-23 hours. Select START HOUR by pressing
the HOT button.
g
Press the WARM button once to advance to next code.
8.0 0 SPECIAL PRICE STOP HOUR
NOTE: Uses military time or 24 hr. clock.
8.00
This is the stop hour; 0-23 hours. Select STOP HOUR by pressing
the HOT button.
g
Press the WARM button once to advance to next code.
9.10 SPECIAL PRICE DAY
9.10
This represents the day of the week and whether special pricing
is selected for that day. A number followed by '0' indicates no
selection that particular day (9.10). A number followed by an 'S'
indicates selected for that day (9.1S). To change the value of '0'
and 'S', use the COLD button.
Days of the week (1-7) are selected by pressing the HOT button.
When exiting set-up code '9', the display must show current day
of week:
DISPLAY DAY OF WEEK
10 Day 1 = Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60 Day 6 = Friday
70 Day 7 = Saturday
g
Press the WARM button once to advance to next code.
A.0 0 VAULT VIEWING OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
A.00
Not Selected 'OFF'.
A.SC Selected 'ON'. Press the COLD button once for this selection.
When selected, the money and/or cycle counts will be viewable
(if counter option[s] is selected) when the coin box is removed.
g
Press the WARM button once to advance to next code.
b.0 5 VALUE OF COIN 1
b.05
This represents the value of coin 1 in number of nickels:
b.05 = $0.25.
By pressing the HOT button, there is the option of 1-199 nickels.
With coin slide activation, this represents the total vend price
in nickels. Example: b.40 is equal to $2.00.
g
Press the WARM button once to advance to next code.
C.2 0 VALUE OF COIN 2
C.20 This represents the value of coin 2 in number of nickels:
C.20 = $1.00.
By pressing the HOT button, there is the option of 1-199 nickels.
g
Press the WARM button once to advance to next code.
EXPLANATION
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
CODE
d.00 COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
d.00 Not Selected 'OFF'.
d.CS Selected 'ON'. Press the COLD button 3 consecutive times
for this selection.
When coin slide mode is selected, set 'b.' equal to value of slide
in 5% increments. Set step 6 (regular cycle price) and step 3
(special cycle price) to number of slide operations. If the installer
sets up 'CS' on a coin drop model, it will not register coins.
g
Press the WARM button once to advance to next code.
E.0 0 ADD COINS OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
This option causes the customer display to show the number
of coins (coin 1) to enter, rather than the monetary amount.
E.00
Not Selected 'OFF'.
E.AC Selected 'ON'. Press the COLD button 3 consecutive times
for this selection.
g
Press the WARM button once to advance to next code.
ENHANCED PRICING OPTION
F.00
F.00
Not Selected 'OFF'.
F.SU Super Cycle pricing enabled. This option allows customers
to upgrade cycles by depositing extra money. Set-up codes
'H.' and 'h.' will be displayed only when this option is enabled.
Press the COLD button for this selection.
g
Press the WARM button once to advance to next code.
H.01 SUPER CYCLE UPGRADE PRICE
(Skipped unless Super Cycle pricing is enabled.)
H.01 This represents the number of coin 1 required to upgrade a
base cycle to a super cycle. Advance from 0-33 by pressing
the HOT button.
g
Press the WARM button once to advance to next code.
h.01 SUPER CYCLE TYPE
(Skipped unless Super Cycle pricing is enabled.)
h.01 This represents the Super Cycle upgrade option. Press the
HOT button to step through upgrade options 1 through 3
as follows:
01 - enhanced wash, extra 3 minutes of wash tumble in addition
to the programmed wash time.
02 - extra rinse for all cycles.
03 - both 01 and 02.
g
Press the WARM button once to advance to next code.
J.C d COIN/DEBIT OPTION
J.Cd Both coin & debit selected. Press the COLD button 3 consecutive
times to change this selection. (Default for 9150 models)
J.C _
Coins selected, debit disabled. Press the COLD button
3 consecutive times to change this selection.
J. _ d
Debit Card selected, coins disabled. Press the COLD button 3
consecutive times to change this selection. (Default for 9160 models)
J.Ed Enhanced Debit is self-selected when a Generation 2 card reader
is installed in the washer. The Ed option cannot be manually
selected or deselected.
g
Press the WARM button once to advance to next code.
EXPLANATION
3