Gree Versati III Owner's Manual page 11

MONOBLOC TYPE
maximum and minimum water operating temperatures.
Item
Cooling
Heating
Water heating
maximum and minimum water operating pressures.
Item
Cooling
Heating
Water heating
maximum and minimum entering water pressures.
Item
Cooling
Heating
Water heating
The range of external static pressures at which the appliance was tested (add-on
heat pumps, and appliances with supplementary heaters, only); If the supply cord
is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
The appliance is intended to be permanently connected to the water mains and not
connected by a hose-set.
If there is any question, please contact with local dealer, authorized service center,
agencies or our company directly.
Minimum water operating
temperatures
7°C
25°C
40°C
Minimum water operating
pressures
0.05MPa
Minimum entering water
pressures
0.05MPa
7
Air-to-water Heat Pump
Maximum
water operating
temperatures
25°C
60°C
80°C
Maximum water
operating pressures
0.25MPa
Maximum entering
water pressures
0.25MPa