Maintenance; Cleaning And Preventative Maintenance - Blodgett 1048 Installation Operation & Maintenance

CLEANING THE OVEN
Painted and stainless steel ovens may be kept
clean and in good condition with a light oil.
1. Saturate a cloth, and wipe the oven when it is
cold.
2. Dry the oven with a clean cloth.
On the stainless front or interiors, deposits of
baked on splatter may be removed with any non-
toxic industrial stainless steel cleaner. Heat tint
and heavy discoloration may be removed with any
non-toxic commercial oven cleaner.
1. Apply cleaners when the oven is cold, and al-
ways rub with the grain of the metal.
Clean Ultra Rokite decks with a triangular scraper
used for cleaning broiler grids. IMPORTANT --
DO NOT use water or any other liquids to clean
the deck!
Clean the aluminized interior portion of the oven
with a mild detergent. DO NOT use caustic solu-
tions such as ammonia, lye or soda ash. DO NOT
use domestic oven cleaners. Any of these prod-
ucts will damage the aluminum coating.
Daily Cleaning
Remove residue from beneath the doors with a
D
small broom or brush.
Weekly Cleaning
Brush out the combustion compartment and
D
control area.
6 Month Cleaning
Clean secondary air ducts and air entry ports.
D
NOTE: If the oven is moved the restraint must be
reconnected after the unit is returned to it's
regular position.

Maintenance

Cleaning and Preventative Maintenance

PREVENTATIVE MAINTENANCE
The best preventative maintenance measures are,
the proper installation of the equipment and a pro-
gram for routinely cleaning the ovens.
This oven requires no lubrication, however, the
venting system should be checked annually for
possible deterioration resulting from moisture and
corrosive flue products.
If maintenance or repairs are required, contact the
factory, the factory representative or a local
Blodgett service company.
17