Advertisement
Quick Links
Advertisement
Related Manuals for DEVAISE AHDG016
Summary of Contents for DEVAISE AHDG016
- Page 1 DEV ISE AHDG016 Wood 3 Drawer Mobile Cabinet V2.0 WWW.DEVAISE.COM...
-
Page 2: General Guidelines
DEV ISE IMPORTANT INFORMATION READ CAREFULLY. KEEP THIS INFORMATION FOR FURTHER REFERENCE. GENERAL GUIDELINES • • Please read the following instruction carefully and use the product accordingly. • Please keep this manual and hand it over when you transfer the product. This summary may not include every detail of all variations and considered steps. - Page 3 DEV ISE If you have any further questions, please feel free to contact us by email or official website: www.devaise.com We will reply ASAP. Before installation, please make sure you have all the hardware, the serial numbers are properly labeled corresponging to the list, and the quantity is correct.
-
Page 4: Exploded Drawing
DEV ISE EXPLODED DRAWING:... - Page 5 DEV ISE PARTS: M4x14...
- Page 6 DEV ISE REMARK: 1. Press the plastic part in the indicated direction to separate drawer runner before assembling. 2. Please grip the part while sliding the part. PRESS MINIFIX POSITION...
- Page 7 DEV ISE REMARK: Please do not screw too deep or too shallow. Appropriate position Too deep Too shallow REMARK： Put a blanket under the board to avoid scratch or damage.
- Page 8 DEV ISE REMARK: M4x14 When installing, please make sure the screws are flattened, Not crooked; Otherwise the drawers will not be installed perfectly. FRONT...
- Page 9 DEV ISE M4x14 REMARK: 1. Please locate the holes from the back of part FRONT E1 Back: E1 Front: 2. Then please install part from the front of part...
- Page 10 DEV ISE ×6 REMARK: Let the grooves on part 2 3 and 4 be connected to the groove on part 5 .
- Page 11 DEV ISE 10 /...
- Page 12 DEV ISE M4x14 ×2 11 /...
- Page 13 DEV ISE ×2 12 /...
- Page 14 DEV ISE ×2 13 /...
- Page 15 DEV ISE ×2 ×2 14 /...
- Page 16 DEV ISE M4x14 ×2 15 /...
- Page 17 DEV ISE 16 /...
- Page 18 DEV ISE Letter Size As shown in Fig. (1) installation method, the A4 Size file can be hung after installation. As shown in Fig. (2) installation method, the Letter Size file can be hung after installation. 17 /...
- Page 19 DEV ISE M4x14 FRONT 18 /...
- Page 20 DEV ISE BALL BEARING REMARK: 1.Please full extend the slide runners. 2.Simply push the ball bearing cart all the way to the end of the slide(in both sides). 19 /...
- Page 21 DEV ISE REMARK： 1. Align the slide runners on the drawer with the unit and push it carefully inside until it stops. 2. If the drawer does not go in smoothly please take it out and repeat the step. ×4 20 /...
- Page 22 DEV ISE FRONT long short REMARK: The long shadow part is in front and the short one is inside. REMARK: Please make the groove on board 7 match with the part 21 /...
- Page 23 DEV ISE M4x14 ×8 22 /...
Need help?
Do you have a question about the AHDG016 and is the answer not in the manual?
Questions and answers