Tunestudio Basics; What You Can Do With Your Tunestudio; What You Can Connect To Your Tunestudio - Belkin TuneStudio User Manual

TuneStudio BASiCS

Your TuneStudio combines multiple audio sources ("channels") into one stereo signal. You can use the following
controls to enhance each channel's sound before it is mixed with the other channels:
• Level control to set the volume
• Pan (or "balance" for stereo channels) control to move the sound to the left or right
• Low, mid, and high EQs ("equalizers") to fine-tune the sound
Your TuneStudio also includes a compressor that can be used to enhance your recordings and keep the volume
levels within the recording limits of the iPod.

What You Can do with Your tuneStudio

• Record to or from an iPod
• Record to or from a computer
• Record from up to 5 audio sources
• Listen to your mix while recording, with studio monitors or headphones
• Play back your recordings from your iPod immediately after recording

What You Can Connect to Your tuneStudio

You can connect almost any instrument, microphone, or other audio device to your TuneStudio.
Your TuneStudio has inputs for four different types of cables: XLR, 1/4" TRS, RCA, and USB. With the right
cables or audio connector adapters, you should be able to connect almost any audio source, including:
• CD players
• Computers
• Drum machines
• Guitars and bass guitars
• Microphones
• Synthesizers and keyboards
2