Advertisement
Handling
Warning
Do not open or disassemble the device. There is a risk of electrical shock when the casing is open. Opening the
case will void your warranty and Wacom shall have no responsibility to repair or replace the device.
Ensure that cabling or other objects do not get entangled in the moving parts of the stand.
Do not place the device on any wet surface or table. The rubber pads of the stand may slip, allowing the device
to fall.
When moving the device, ensure all cables are fully disconnected from the computer and other areas.
Appropriately bundle the cables to ensure they do not hang free and create a hazard. Tripping over loose cables
can cause physical damage or personal injury.
Do not place the device on any unsteady surface or table. Do not place it on slanted areas, unstable areas, or
areas where vibration is present.
Physical damage or personal injury may result if the device falls from an unsuitable surface.
Do not sit on, or hang from, the table or other surface where the device is placed. The device may fall and cause
physical damage or personal injury. Take extra care where children are present.
If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking from it; this liquid is an
irritant. In case of contact with skin, eyes, or mouth, rinse immediately with running water for at least 15 minutes.
If contact is made with the eyes or mouth, consult a physician.
Choking hazard. Prevent children from swallowing the pen tip. The pen tip may accidentally be pulled out if
children are biting on them. Prevent children from playing with any packing materials or wrapping, as a choking or
suffocation hazard may exist.
Refrain from using the device during thunder or electrical storms. Also disconnect the device from the USB port of
a computer during such weather. Using the device during thunder or electrical storms may cause device
malfunction, fire, or electrical shock.
Caution
Do not disassemble the pen. This may cause the device to malfunction. In this case, Wacom shall have no
responsibility to repair or replace the pen.
Do not strike hard objects with the pen, such as repeatedly tapping the pen against a desk surface. Doing so may
cause damage to the pen.
Do not apply excessive pressure or stress to the pen tip. This may cause failure or malfunction.
Take care not to drop or damage your pen. Use the pen tether provided to secure your pen.
Only use a replacement pen tip (nib) specified for the pen by Wacom.
Do not scratch the display screen. Avoid placing sharp objects on the display screen surface.
Avoid shock or vibration to the device and the pen. Hitting or dropping the device may damage the display screen
or other components.
Do not put heavy objects on the device or push against it with a strong force; this may damage the display screen
or break the display stand mechanism.
Do not place heavy articles on the cabling of the device, repeatedly bend the cables sharply, or apply heavy stress
to the cable connectors; this may damage the device or cabling.
Do not store the device on a surface that would excessively bend or crimp the cable.
If your device has a coated surface, a worn pen nib that is sharp or angular may cause damage. Replace the pen
tip if necessary.
Do not use any organic solvent (e.g. alcohol) or even mild detergent to clean the display screen. Use of these
cleaners can damage the display screen. Damage of this kind is not covered by the manufacturer's warranty.
Before cleaning, always disconnect the device from the USB port.
To clean the display screen, use an anti-static cloth or a slightly damp cloth. When cleaning, apply only a light
amount of pressure to the display screen and do not make the surface wet.
To clean the device casing or the pen, use a soft cloth slightly dampened with water.
Touching the same part of your body to the device (LCD panels and other areas) for extended periods of time may
cause low temperature burns.
Do not place metallic objects on the device when using the device. Doing so may cause malfunction or damage to
the device.
Placing other tablets or other devices near the device may affect the operation of the device and cause
malfunctions. If this happens, place the interfering devices to the side or further away from the device.
To avoid permanently discoloring or altering the surface of your work area, periodically move the device to another
part of the surface.
© 2017 Wacom Co., Ltd. All rights reserved.
Wacom and the respective logo are trademarks and/or registered trademarks of Wacom Co., Ltd.
Advertisement
