Disable Electronic Stability Protection (Esp) - Garmin G3X Touch Manual

4.8

Disable Electronic Stability Protection (ESP)

(If Installed, GFC 500 Autopilot)
To disable ESP for flight training purposes:
1. Touch the FD mode status bar at the top of the PFD, Automatic Flight Control System
window opens
2. Highlight and Select ESP. The green ESP status bar extinguishes. ESP is disabled.
3. Press and Hold the BACK button to close the Automatic Flight Control System window
and return to PFD display.
4. To enable ESP, Highlight and Select ESP.
ESP is enabled.
5. Press and Hold the BACK button to close the Automatic Flight Control System window
and return to PFD display.
190-01754-01 Rev. 4 FAA Approved AFMS or Supplemental AFM for the Garmin G3X Touch EFIS
The green ESP status bar illuminates.
P a g e | 4-15