Table of Contents
Advertisement
Getting started
• Turn on the e-scooter and the lights (see the section on "Display functions").
• Hold the handlebars firmly by both handles, and place one foot on the foot board.
• Push off with the other foot to accelerate.
• For safety reasons, the motor support is only active from 1.8 mph and above.
• Use the thumb throttle to accelerate.
• To apply the brake, use:
1. the rear disc brake (brake lever)
2. the electric front brake (thumb brake)
• Before starting your journey, make sure that the front and rear lights work!
• It is imperative that the lights are switched on in the dark or in poor visibility!
Shell
RIDE
17
Advertisement
Table of Contents
