Battery Usage - Shell RIDE SR-5S User Manual

Battery usage

1. Open the protective cap of the charging port.
2. Make sure the charging port and charger are dry.
3. Make sure that the e-scooter is turned off.
4. Connect the charging cable to the charging port.
5. Connect the charging device's main plug to a suitable wall socket
(110 ~ 120 Vac @ 60 Hz).
6. The charging light on the charger will light red when charging.
7. The battery is charged once the charging light changes from red to green.
You should stop charging the battery at this point.
8. Disconnect the charger from the main plug and the e-scooter.
9. Close the protective cap of the charging port.
Shell
RIDE
Charging Port
12