Table of Contents
Advertisement
Fig. 2.5
Fig. 2.6
Fig. 2.7
Fig. 2.8
Fig. 2.9
Instructions for the Water
Dispenser
To fill the water dispenser lift the lid upward and add water
through the water injection port (Fig. 2.5).
Replace the lid to cover the water port.
To activate the water supply lightly press the lever. Cold water
will be dispensed accordingly (Fig. 2.6).
Cleaning
• Press the buckle and open the buckle (on the lid)
outwards (Fig. 2.7).
• Lift lid up.
• Squeeze the water tank inward and lift it up (Fig. 2.8).
• Remove the water tank module.
After Cleaning
• Put the lid on the water tank.
• Load the water tank on the door at 45° (Fig. 2.9).
10
Advertisement
Table of Contents
