1.
To reset the present time in the display window when the oven is off, press the CLOCK button and reset.
2.
If you make a mistake when setting the time, press the STOP/CLEAR button
3.
To recall the actual time while the oven is cooking or defrosting, simply press the CLOCK button and the display will
show the current time for three seconds
WEIGHT DEFROST PROGRAM
WEIGHT DEFROST program lets you easily defrost foods by eliminating guesswork in determining defrosting time.
The minimum weight for Auto Weight Defrost is 4 Oz (±126 gr) and maximum weight is 100 Oz(± 3150 gr. Follow the
steps below for easy defrosting:
Press WEIGHT DEFROST button, LED will display
1
―dEF 1.
2
Press the number keys to set desired weight
Press START/+30SEC button, to start defrosting, the display will countdown
3
the remaining defrosting time in minutes and seconds. It will beep 5 times
when defrosting is completed .
TIME DEFROST PROGRAM
TIME DEFROST will automatically set the oven to defrost at a time set by the user.The minimum time for Time Defrost is 1
second. The maximum time is 99 minutes 99 seconds. Follow the steps below for easy defrosting.
Press TIME DEFROST button, LED will display
1
―dEF 2
Press number keys to set the desired time.
2
Note: The default microwave power is power level 3. If you want to change the
defrost level, press "power" once, then press the number key to enter the level
you want..
Press START/+30SEC button, to start defrosting, the display will show count
3
down the remaining defrosting time in minutes and seconds. It will beep five
times when defrosting is completed .
COOKING IN ONE STAGE
Set a cooking or other operational time/power as follows. The maximum cooking time is 99 minutes 99 seconds.
1
Press TIME COOK button, ―00: 00‖ will light in the display
Press number keys to set the desired cooking time. Up to 99 minutes 99
seconds .
2
3
Press POWER button, ―PL 10‖ will light in the display .
4
Press the number key for the power level you want .
8
Need help?
Do you have a question about the MG 3116 and is the answer not in the manual?