Troubleshooting Table; Transport And Storage - Breeze AWC Series User Manual

We bring better air to life

11. TROUBLESHOOTING TABLE

PROBLEM
Ÿ When switching on the
unit the fan does not
start.
Ÿ
Circuit breaker
tripping during the fan
start.
Ÿ
Low air flow.
Ÿ
Poor foundation
Ÿ
Fault installation
Ÿ Low voltage
Ÿ
Sucked in objects /
Adhere dust
Ÿ
Incorrect wiring

12. TRANSPORT AND STORAGE

Transport
• Our products are packed at the factory to suit the respectively agreed mode of transportation. Transport the fan in its original
packaging.
• Fans are protected against damage during shipment. If the unit cannot be installed and operated immediately, precautions need
to be taken to prevent deterioration of the unit during storage. The user assumes responsibility of the fan and accessories while
in storage. The manufacturer will not be responsible for damage during storage. These suggestions are provided solely as a
convenience to the user.
• Only use suitable means of transport, such as pallet trucks or fork-lift trucks or hoist machine.
• If the fan is to be transported by hand, ensure that supporting and carrying loads are kept within reasonable limits for the
personnel involved.
• The fans must not be dropped or thrown. Avoid scratches or rough handling during loading and unloading.
• Parts which have been stacked too high can collapse.
• Avoid a distortion of casing or blades or other damage.
• Danger ! Do not step under hanging loads.
Storage
• Store the unit in the manufacturer's original packaging box in a dry closed ventilated premise with temperature range from +5˚С
up to +40˚С and relative humidity up to 85%.
• Store the fan in a dry, weather-protected location in its original packaging or protect it from the effects of dirt and the weather
until final assembly. Storage environment must not contain aggressive vapours and chemical mixtures provoking corrosion,
insulation and sealing deformation.
• Rotate fan impeller monthly and purge bearings once every three months.
• If storage of fan is in a humid, dusty or corrosive atmosphere, rotate the fan and purge the bearings once a month. Improper
storage which results in damage to the fan will void the warranty.
• Avoid lengthy storage periods (a maximum of one year is recommended) and check that the motor bearing assembly is in good
functional order prior to fitting. With storage times of more than 1 year, please check the bearings on soft running before
installation (turn by hand).
www.breeze.com.vn | breezefans@breeze.com.vn
POSSIBLE REASONS
Ÿ
No power supply.
Ÿ
Motor jamming.
Ÿ The automatic circuit breaker is
triggered by an abnormally high current
consumption due to a short circuit.
Ÿ Clogging of air ducts or other ventilation
system elements. Impeller clogging.
Damaged air ducts. Air damper closure.
Ÿ
Excessive noise
Ÿ
Excessive vibration
Ÿ
Excessive noise
Excessive vibration
Ÿ Insufficient air flow
Ÿ
Motor too hot
Ÿ
Excessive noise
Ÿ
Excessive vibration
Ÿ
Run abnormally
Thank you for your cooperations!
USER'S MANUAL
TROUBLESHOOTING
Ÿ
Check the electrical connections and the power
switch status.
Ÿ
Turn off the fan.
Ÿ
Troubleshoot the impeller jamming.
Ÿ Restart the fan.
Ÿ
Disconnect the fan from power mains and
contact the Breeze Seller.
Ÿ Do not turn on the fan again.
Ÿ
Clean the air ducts and other ventilation system
elements as well as the impeller.
Ÿ Check the air ducts for damage.
Ÿ
Make sure the air dampers and louver shutters
are open.
Ÿ
Reinforce the foundation
Ÿ
Re-adjust the installation
Ÿ Check power source
Ÿ
Inspect and clean
Ÿ
Change wiring
AWS SERIES
08