Advertisement
PROGRAMMING
Custom Programming
This thermostat can be configured to have 7 Day or 5+1+1 programming. If 7 Day is selected, all
seven days will need to be programmed individually. If 5+1+1 programming is selected, Monday–Friday
will be programmed together and Saturday and Sunday will need to be programmed individually.
There are four time periods for each day (WAKE, LEAVE, RETURN, SLEEP).
Follow the steps below to customize your program schedule:
1.
Select HEAT or COOL. Note: Heat and cool
need to be programmed separately.
2.
Press MENU (If menu does not appear first,
press RUN SCHED).
3.
Press SET SCHED. Note: Monday–Friday
(or Monday if in 7 Day mode) will be displayed
and the WAKE icon is shown.
4.
Time will be be flashing. Use
make your time selection for the WAKE time
period for Monday–Friday (or Monday if in
7 Day mode).
5.
Press NEXT STEP.
6.
The set-point temperature will be flashing.
Use
or
to make your set-point
selection for the WAKE time period for
Monday–Friday (or Monday if in 7 Day mode).
22
7.
Press NEXT STEP.
8.
Repeat steps 4 through 7 for the LEAVE time
period, for the RETURN time period, and for
the SLEEP time period for Monday–Friday (or
Monday if in 7 Day mode).
9.
Repeat steps 4 through 8 for the Saturday
WAKE, LEAVE, RETURN, and SLEEP time
periods, and then again for the Sunday
or
to
WAKE, LEAVE, RETURN, and SLEEP time
periods for the 5+1+1 program schedule, and
for each day for the 7-day program schedule.
Advertisement
