Cd Player And Led Board Location And Cables - Commodore Amiga CD32 User Manual

2-2 Separating and Connecting the System Top and Bottom Cases
4. The CD drive assembly and LED board are connected to the top case and their cables attach
to the motherboard in the bottom case. Very carefully lift up the top case from the bottom
case a few inches.
5. Remove the LED board cable from the LED board installed in the top System case. Locate
the LED board cable in Figure 2*1. Grasp the connector by the outside edges. Pull it out of
the socket and lift the cable out of the niche behind the tab in the bottom of the System case.
Make certain to place the cable behind the tab on the bottom of the system case when
replugging it into the LED board.
CD Drive CD Drive Cable
Figure 2-1. CD Player and LED Board Location and Cables
6. Flip the top case up at a 90® angle to expose the inside of the top and bottom cases.
7. Remove the LED board cable from the motherboard. Locate the LED board cable socket on
the bottom of the case in Figure 2-2. Make certain to place the cable behind the tab on the
bottom of the System case when replugging it into the motherboard.