The Game Controller; Using The Amiga Cd32 Software; Playing Audio Cds; Selecting A Language - Commodore Amiga CD32 User Manual

1-4
Using the Amiga CD32 Software
The Game Controller
The System comes with a customized game Controller that has four play buttons, a pause/start
bar, two general feature bars and an omni-directional movement button. The Controller is used
for controlling game play, making audio selections and defining System set-up options..
Using the Amiga CD32 Software
Once the System has been tumed on, you can change CDs by just lifting the lid and the disc
stops spinning. The System Starts again when you dose the lid.
•
Ifyou put an Amiga CD32 game in the drive the logo screen appears for a few seconds while
the game loads. Then the game Starts.
• Ifyou put an audio CD in the drive you'll see the audio control display.
•
If there is no CD in the drive you'll see the Amiga CD32 logo screen.
Play Ing Audio CDs
The user can play an audio CD in one of two ways: from the Controller or from the audio display.
The easiest way is to press the appropriate button on the Controller. The function Symbols
associated with the buttons are identical to those on the display. The other way is to highlight
the appropriate box on the display and press the red button to select it. Use the black
directional button to move the highlight around the display.
Selecting a Language
From the logo screen press the blue button to see the language selection screen. Choose a
preferred language for game playing on this screen. This is a one time selection.
Locking Game Information
From the logo screen press the red button to see the gamelock screen. The Amiga CD32 can save
100 memory units worth of game information. This screen allows the user to protect old game
information from being aeleted or replaced by other game information by "locking" it.