Connecting A Television/Monitor - Commodore Amiga CD32 User Manual

1-2
Connecting a Television/Monitor
Connecting a Television/Monitor
The easiest way to connect the Amiga CD32 System to a television/monitor is to use the RF
modulator th at provides all the video and audio connections necessary. For a PAL System: Use
the provided RF modulator cable. For a NTSC System use the provided RF switch box to
connect a television/monitor with a VHF cable (F-type) connector and 75Q antenna, cable or
VCR cable. The NTSC System requires a 300/75Q Converter for an antenna or rabbit ears with
twin lead wire and a 75/300Q Converter for VHF screw type connectors.
S-video and composite video are options, but require the customer to purchase additional
spedalized cables. The customer is referred to his TV documents in order to determine whether
his set is S-video or composite video compatible.
The Stereo audio cables allow the customer to connect to TV stereo, powered Speakers, or
Standard stereo output.
See Figure 1-2 for the location of the side and rear panel features.
Figura 1-2. Slde and Rear Panels