Commodore Amiga CD32 User Manual page 11

Connecting a Television/Monitor
1-3
Table 1-1 lists each socket on the System unit side and rear panels and summarizes the
Information provided to the customer.
Table 1-1. Side and Rear Panel Connectors
Connector
Description
Game Controller
Connector
Plug the game Controller into socket 1. To use a second game Controller, joystick
or mouse, plug it into socket 2. Donl plug or unplug a Controller while the power is
on.
Auxiliary Connector To use keyboard or another device, plug it into the socket marked AUX.
RF Connector Plug the RF modulator cable into the jack and the other end into the
television/monitor.
For a PAL System:
Set the switch to the left (5.5 mHz) for the United Kingdom and to the right (6.0
mHz) for all other countries.
If the television/monitor picture is not clear, use a small flat-bladed screwdriver to
turn the screw until the picture is in Sharp focus.
For a NTSC System:
Set the switch to left for channel 3 and or the right for channel 4, whichever is not
used in your geographical area.
For both Systems use the television/monitor volume control to adjust the sound.
S-video Connector
To use S-video, the customer must buy an S-video cable with a 4-pin mini-DIN
connector at each end. Plug one end of the cable into the socket under the Symbol
and the other into the television/monitor.
Composite Video
Connector
To use composite Video, the customer must buy a composite video cable with an
RCA plug at each end. Plug one end of the cable into the yellow socket and the
other into the television/monitor.
Right and Left Audio If the customer has a
Stereo television/monitor,
he can use the
Stereo
audio
cables
Connectors
shipped with the System. Plug the white cable into the white socket and the other
cable into the red socket. Connect the other end to the television/monitor.
If the customer wants to connect a television/monitor with mono sound, he should
plug the white cable into the white socket under the Symbol. Do not connect the
other cable. Plug the white cable on the other end into the television/monitor.
Plug in the power supply and turn on the System only after securely connecting these options.
In the United Kingdom manual, the customer is told to have a certified electrician attach the
correct plug to the cable.
The control panel in the front of the machine contains the reset button, power and disk activitv
lights, headset jack and headset volume control.