Connecting Cables To Acronis Cyber Appliance - ACRONIS Cyber Appliance Quick Start Manual

3.3 Connecting cables to Acronis Cyber Appliance
Note
For more details on configuring the network infrastructure, refer to the Administrator Guide.
To prepare Acronis Cyber Appliance for configuration, do the following:
1. Connect the appliance to the electrical outlets by using the supplied power cables.
2. On every node, connect any SFP+ or RJ45 network port (1 on the diagram) to a switch (2 on the
diagram) with access to a dedicated subnet for your infrastructure. Then, connect the admin
laptop (3 on the diagram) to the same switch. The diagram below shows an example of the cable
connection.
9 © Acronis International GmbH, 2003-2021