ACRONIS Cyber Appliance Quick Start Manual page 13

If one or more nodes are not reachable from the primary node, they will be marked as offline. In
this case, make sure the nodes are powered on and connected to the correct network. The
deployment will be blocked until all nodes are green (which means they can be accessed and
configured from the primary node).
Note
You will be able to configure bonds and VLANs later in the admin panel.
5. Under Appliance name, enter the cluster name. You cannot change it later.
6. Under Password, enter a password to log in to the local Acronis Cyber Infrastructure admin
panel.
13 © Acronis International GmbH, 2003-2021