3. On the next step, select Join the existing cluster.
4. Under Configure network parameters, enter the following:
A network mask. Consult your network administrator for the proper network/subnet mask.
l
New host names for all nodes (or leave the default names). You can rename the nodes to fit
l
your organization's naming policies.
Note
Each node in the existing cluster and in the appliance must have a unique name. If at least
two nodes have the same name, the installation will stop.
New static IP addresses for the network interfaces connected on all the nodes.
l
Note
Use IP addresses from the network/subnet of the existing cluster. The installation will be
blocked until all of the five nodes are given IPs from the same subnet/network as the existing
cluster.
15
© Acronis International GmbH, 2003-2021