Table of Contents
Advertisement
3. At the next step, select Create a new cluster.
4. Under Configure network parameters, enter the following:
A gateway. Consult your network administrator for the proper gateway address.
l
A network mask. Consult your network administrator for the proper network/subnet mask.
l
At least one local DNS server.
l
A virtual IP address at which you will access the admin panel. You can read more about its
l
high availability in the "Enable management node high availability" in the Administrator Guide.
New host names for all nodes (or leave the default names). Each node must have a unique
l
name. Otherwise, the installation will stop. You can rename the nodes to fit your
organization's naming policies.
New static IP addresses for the network interfaces connected on all the nodes. If you leave the
l
fields empty, the default addresses of 10.20.20.11 to 10.20.20.15 will be used.
12
© Acronis International GmbH, 2003-2021
Advertisement
Table of Contents
