Operation - Okoia CGS4 Operating Instructions Manual

DISPLAY

OPERATION

Measuring Weight
1.Place the scale on a hard and flat surface.
2.Step on the scale and stand still.
The scale display will flash to indicate that the reading
is accepted.
3. In case you want to change the measurement unit,
Choose pounds (lb) or kilograms (kg) by setting the
unit switch located on the back of the scale. After the
desired unit is selected, wait for the scale to switch off then step on the scale again to
measure your weight in the selected unit.
NOTE: If the scale is not used for approximately 10 seconds, the scale will automatically switch off.
Comparing Weight
This scale has 4 personal data settings.
kg
2
GB
lb